# generated by Slic3r 1.3.1-dev on 
adaptive_slicing = 0
adaptive_slicing_quality = 75%
avoid_crossing_perimeters = 0
bed_shape = 0x0,300x0,300x300,0x300
bed_temperature = 0
before_layer_gcode = 
between_objects_gcode = 
bottom_infill_pattern = rectilinear
bottom_solid_layers = 0
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 40
brim_connections_width = 0
brim_width = 0
compatible_printers = 
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 2
dont_support_bridges = 1
duplicate_distance = 6
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 40
external_perimeters_first = 1
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1.03
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id = 
fill_angle = 90
fill_density = 100%
fill_gaps = 1
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_height = 0.25
first_layer_speed = 100%
first_layer_temperature = 205
gap_fill_speed = 40
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 40
interface_shells = 0
interior_brim_width = 0
label_printed_objects = 0
layer_gcode = 
layer_height = 0.25
match_horizontal_surfaces = 0
max_fan_speed = 70
max_layer_height = 0.3
max_print_speed = 80
max_volumetric_speed = 0
min_fan_speed = 35
min_layer_height = 0.15
min_print_speed = 10
min_shell_thickness = 0
min_skirt_length = 0
min_top_bottom_shell_thickness = 0
notes = 
nozzle_diameter = 0.4
octoprint_apikey = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
overhangs = 0
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 40
perimeters = 0
post_process = 
pressure_advance = 0
print_host = 
print_settings_id = 
printer_notes = 
printer_settings_id = 
raft_layers = 0
regions_overlap = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 0
retract_length = 2
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
seam_position = nearest
sequential_print_priority = 0
serial_port = 
serial_speed = 250000
shortcuts = support_material
skirt_distance = 4
skirt_height = 1
skirts = 0
slowdown_below_layer_time = 5
small_perimeter_speed = 40
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 50
spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = "; Filament gcode\n"
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 1
support_material_contact_distance = 0.15
support_material_enforce_layers = 2
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_extrusion_width = 0
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_max_layers = 200
support_material_pattern = pillars
support_material_pillar_size = 5
support_material_pillar_spacing = 10
support_material_spacing = 2.5
support_material_speed = 50
support_material_threshold = 60%
temperature = 205
thin_walls = 0
threads = 6
toolchange_gcode = 
top_infill_extrusion_width = 0
top_infill_pattern = rectilinear
top_solid_infill_speed = 30
top_solid_layers = 0
travel_speed = 100
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
xy_size_compensation = 0
z_offset = 0
z_steps_per_mm = 0